What is a Filter Press? Full-time Job8 months ago - Financial Services - Desenzano del Garda - 345 views
What is a Filter Press?
In some batch filtration processes, highly permeable suspensions dewater fast compared to the rest of the process. This work explores the impact of fast-filtering compressible materials on the throughput of fixed-chamber filter presses. The dewatering properties for a compressible yet highly permeable minerals processing slurry are used as inputs to a standard filter press model to explore the effects of operating and design parameters. For fast-filtering materials, maximum throughput is achieved with wide cavities and minimal handling time, while membrane resistance can be significant. Pressure affects the maximum achievable concentration, as given by the strength of the material. Overall, this work demonstrates the combined use of material characterisation and device modelling for filter press optimisation.
This article answers three common inquiries. What is a filter press? How does a filter press work? What is a filter press used for?
We’ll also give you some advice on sizing your equipment (including your feed pump). Our Sales and Service Team is looking forward to answering any other questions you might have.
WHAT IS A FILTER PRESS?
A pressure leaf filter is a batch operation, fixed volume machine that separates liquids and solids using pressure filtration. A slurry is pumped into the filter press and dewatered under pressure. It is used for water and wastewater treatment in a variety of different applications ranging from industrial to municipal.
M.W. Watermark manufacturers filter presses ranging from .06-600 cubic feet.
Slurry is pumped into the filter press. The solids are distributed evenly during the feed (fill) cycle.
Solids begin to build on the filter cloth. Most of the solid/liquid separation is done by the filter cake building on the cloths. At first some fines may pass through the cloth (1), but eventually the solids begin to form a layer on the filter cloth (2) much like a pre-coat. That layer traps the fine particles and forms a filter cake (3).
As the vertical pressure leaf filter builds pressure, the solids build within the chambers until they are completely full of filter cake. When the chambers are full, the fill cycle is complete. The filtrate (liquid) exits the filter pack (plates) through the corner ports into the manifold; when the correct valves in the manifold are open, the filtrate exits the press through one single point, the filtrate outlet.
HOW LONG DOES A FILTER PRESS CYCLE TAKE?
The Total Cycle time is the Fill Cycle time plus a constant. For presses of 125 cubic feet and under this constant is usually around 45 minutes. This is the time required to close/open the press, perform the Air Blow Down and discharge the filter cake. If the particular application requires operations such as Core Blow or Cake Wash, for example, this constant is longer.
HOW LONG DOES A FILL CYCLE TAKE?
The Fill Cycle is dependent on many parameters. The most important parameter is the nature of material to be dewatered. A sand slurry releases its water readily and dewaters quickly. On the other hand, an Aluminum Hydroxide waste slurry from beverage can manufacture does not readily release its water and dewaters slowly.
The next most important parameter is the concentration of the solids by weight in the slurry. The Fill Cycle for a 5% solids slurry is about twice as long as a 10% solids slurry (with all other parameters being equal). This is because the press has to process half of the water to fill with solids.
Other parameters include the thickness of the filter cake, the maximum feed pressure which the slurry is fed to the press, and the filter cloth selection. These parameters are typically fixed during the proposal process.